Directed 403.TL11 1.15 Скачать руководство пользователя страница 19

Страница: 19 / 21

403.TL11 1.15 2010 Toyota Camry
©2022 VOXX•DEI LLC. All rights reserved.

Limited 12 Months Consumer Warranty

VOXX DEI LLC (the Company) warrants to the original purchaser of this product that should this product or any part

thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date

of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s

option) without charge for parts or repair labor. A transmitter for a vehicle security or remote start system is warranted for

12 months from he date of original purchase.

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty

coverage (e.g. dated bill of sale), authorization number, specification of defect(s), transportation prepaid, to an approved

warranty station. This warranty is not transferable.

This Warranty does not cover damage to the vehicle’s electrical system or costs incurred for the installation, removal or

reinstallation of the product. This Warranty does not cover batteries, broken LCD transmitter display screens, nor apply

to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,

improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or defacement of the factory serial

number/bar code label(s).

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY

IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN

WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY

OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL

PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL

OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is

authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.

The company does not warrant that this product cannot be compromised or circumvented. THE EXTENT OF THE

COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED

ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY

PURCHASER FOR THE PRODUCT WITHOUT INSTALLATION LABOR.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or

consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal

rights and you may also have other rights which vary from state to state.

VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824

Содержание 403.TL11 1.15




















Результаты поиска

Содержание 403.TL11 1.15

Отзывы:

Directed 403.TL11 1.15, Руководство по установке, Страница: 19 / 21

Результаты поиска

Содержание 403.TL11 1.15

Отзывы: