Directed Electronics PYTHON 480XP, Руководство по установке

Страница: 31 / 36

© 2002
Directed Electronics, Inc.
31
4. Release the Valet/program switch.
5. Press and release the Valet/program switch.
The LED will now report the last system shutdown by flashing for one minute in the below grouped
patterns; the LED will stop flashing when the ignition is turned on.
Rapid Resume Logic
Rapid Resume Logic ensures that the when the system is powered up it will return to the same state
it was in when power is disconnected. For a full description of Rapid Resume Logic refer to the
owner's manual.
Timer Mode
Timer Mode allows the operator to program the remote start system to start the engine every three
hours a total of 6 times. For a full description of Timer Mode activation refer to the owner's manual.
LED FLASHES SHUTDOWN MODE
One System timed out
Two Over-rev shutdown
Three Low or no RPM
Four Transmitter Shutdown (or optional push-button)
Five (-) Shutdown
Six (+) Shutdown
Seven (-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Eight Wait-to-start timed out