23
© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
The remote will respond with 3 Orange LED flashes on entering
and 2 beeps and 3 Orange LED flashes on exiting Valet
®
Mode.
To enter or exit Valet
®
Mode using the 2-way remote:
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The in-vehicle status LED will light solidly if you are entering
Valet
®
Mode, and it will go out if you are exiting Valet
®
Mode.
The remote responds with the normal arm/disarm notifications
with each remote button press.
remote start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm
up the engine, as well as adjust the interior temperature of the ve-
hicle with the climate control system. If interior heating or
cooling is desired, the climate controls must be preset, and the
fan blower must be set to the desired level prior to remote starting
the vehicle.
iim
mp
poorrttaan
ntt!! (1) Never remote start your vehicle when the
keys are in the ignition, except when performing Valet
®
Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.
➜
