Directed Electronics 871XP, Руководство по установке

Страница: 22 / 55

2 22 2
© 2004 Directed Electronics, Inc. Vista, CA
This wire sends a negative pulse every time the remote start shuts down or the doors are locked. This can be
used to pulse the arm wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to the
arm wire.
This wire provides a (-) 200mA output whenever the transmitter button(s) controlling Channel 4 is pressed. This
output can be programmed to provide the following types of outputs (see also the Feature Menus section):
■
V Vaalliid diittyy:: Output that will send a signal as long as the transmission is received.
■
LLaattcch heed d:: Output that will send a signal when the Channel 4 button(s) is pressed and will continue until the
same button(s) is pressed again.
■
LLaattcch heed d,, rreesseett w wiitth h iig gn niittiio on n:: Similar to the latched output, this type of output turns on the first time the
Channel 4 button(s) is pressed and turns off the next time the same button is pressed. This type of output
additionally stops and resets whenever the ignition is turned on and then off.
■
3 30 0--sseecco on nd d ttiim meed d:: Output that will send a continuous signal for 30 seconds.
■
SSeecco on nd d u un nllo occkk o ou uttp pu utt:: This output can also be programmed to provide a second unlock pulse whenever the
H H2 2//4 4 V VIIO OLLEETT//B BLLA ACCK K cch haan nn neell 4 4 o ou uttp pu utt
H H2 2//3 3 G GR REEEEN N//W WH HIITTEE ((--)) ffaacctto orryy aallaarrm m rreeaarrm m