Directed Electronics 2102T, Руководство по установке

Страница: 11 / 24

11
© 2012 Directed� All rights reserved�
Type 3b - PKE + Xpresskit DIRECTED Smar Viper/Python/Clifford
Directed Remote Starter (with 6-pin antenna connector)
(+) Door Sense Input: White/Purple: 4****
(-) Starter Kill Output: White/Black: 6
(-) Door Sense Input: Blue/White: 10****
(+) Brake Input: Purple/Black: 5
(+) Brake
(-) Door Sense****
(+) Door Sense****
A
ntenna RF P
or
t
ESP Red
Connector
ESP Black
Connector
6 Gr
een
6 Black
4 Red
2 Black
2 Red
10 Black
LED
PKE
Prog. Button
(-) Ground: Black: 2
(+) 12v: Red: 4
LED
(+)12v
TX
(-) Ground
RX
D2D Y CABLE
A
ntenna**
A
ntenna Har
ness**
10-foot Antenna Cable***
*Sold separately.
**Antenna, Antenna harness & DIRECTED SmartStart
TM
cable are sold with your Remote Starter kit.
***10-foot Antenna Cable is included in the PKE kit.
**** Door sense: The polarity of the door sense in the vehicle will determine which wire to connect
from the PKE to the DIRECTED Remote Starter.
(-) Horn Output: Red/White: 3
Antenna (8 feet)
Antenna (18 feet)
Refer to the
Antenna Location
and Installation Points
section on page 5 for
more information.
Connect these wires
to the vehicle.
DIRECTED
SmartStart
TM
*
3 wires red
connector
(+) Ignition Output
86 85
30
87a
87
(+) Starter Wire
Not Used
Starter Disable:
This connection is
optional and ad-
ditional parts are
sold separately.
The remote starter model will
determine which connector to use.
Refer to the DIRECTED SmartStart
install guide for proper connection.
OR
This toggle switch will
bypass the starter disable.
D2D Red
Connector
4 White
Xpr
esskit
Interface Module*
(+) 12v: Red: 4
(-) Ground: Black: 2
RX: Green: 3
TX: Blue: 1
2 White
Optional
Antenna (12 feet)*
(Part# SANT-PKE12)