Direct Supply Direct Choice DSDC2CPD, Руководство пользователя

Страница: 24 / 32

24
Guidance and Manufacturer’s Declaration - Electromagnetic Immunity
This device is intended for use in the electromagnetic environment
specified below. The user must assure that it is used in such an
environment.
Immunity test
IEC 60501
test level
Compliance
level
Electromagnetic
environment
Portable and mobile RF
communications equipment
should be used no closer
to any part of the device,
including cables, than the
recommended separation
distance calculated from
the equation applicable
to the frequency of the
transmitter.
Conducted RF
IEC 6100-4-6 3Vrms 150
kHz to 80 MHz
3Vrms d=(3.5/V1)*(√(P))
Radiated RF
IEC 61000-4-3 3V/m 80 MHz
to 2.5 GHz
3 V/m
d=(3.5/E1)*(√(P)), 80-800 MHz
d=(7/E1)*(√(P)), 0.8-2.5 GHz
Where P is the maximum
output power rating of the
transmitter in watts (W)
according to the transmitter
manufacturer, and d is the
recommended distance in
meters (m). Field strengths
from fixed RF transmitters,
as determined by an
electromagnetic site survey,
should be less than the
compliance level in each
frequency range.
Electromagnetic Capability
(EMC) Tables
(cont.)