20
• Lead Connector: Connection of the electrodes is made with a
two-lead connector. The device must be switched off before
connecting the cables. Both intensity controls must be at the
off position. Electrodes must be pressed firmly on the skin.
• Mode Control: There are five modes available: Burst,
Normal, Modulation, SD1 and SD2. The mode can be
selected by pressing the “MODE” control button.
• Set Control: By pressing the “SET” control button, you
may enter the setting you intend to adjust. You may start
to set the value by pressing the “Increase” and “Decrease”
controls when the value is flashing.
• Increase Control: The upward-facing arrow button will
increase the settings. When this button is pressed, the
selected parameter will increase.
• Decrease Control: The downward-facing arrow button will
decrease the settings. When this button is pressed, the
selected parameter will decrease.
• Timer: This device has a timer of 1-60 minutes. The timer
can be adjusted by pressing the “SET” and “Increase” or
“Decrease” controls. The treatment time will countdown
automatically by one minute. Its output will be shut off
when time is up.
Functions and Use
(cont.)
Plug
Lead connector
DSDC2CD
