PP8 Plus
11
IN50001 Rev. C 04/30/2008
OWNER / EMPLOYER RESPONSIBILITIES
The Owner / Employer:
• Shall ensure that lift operators are qualified and that they are trained in the safe use and operation
of the lift using the manufacturer’s operating instructions; ALI/SM01-1,
ALI Lifting it Right
safety
manual; ALI/ST-90
ALI Safety Tips
card; ANSI/ALI ALOIM-2000,
American National Standard for
Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance
; ALI/WL Series,
ALI Uniform Warning Label Decals/Placards
; and in the case of frame engaging lifts, ALI/LP-GUIDE,
Vehicle Lifting Points/Quick Reference Guide for Frame Engaging Lifts
.
• Shall establish procedures to periodically inspect the lift in accordance with the lift manufacturer’s
instructions or ANSI/ALI ALOIM-2000,
American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance
; and The Employer Shall ensure that lift
inspectors are qualified and that they are adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the lift in accordance with the lift manufacturer’s
instructions or ANSI/ALI ALOIM-2000,
American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance
; and The Employer Shall ensure that lift
maintenance personnel are qualified and that they are adequately trained in the maintenance of the
lift.
• Shall maintain the periodic inspection and maintenance records recommended by the manufacturer
or ANSI/ALI ALOIM-2000,
American National Standard for Automotive Lifts-Safety Requirements for
Operation, Inspection and Maintenance
.
• Shall display the lift manufacturer’s operating instructions; ALI/SM 93-1,
ALI Lifting it Right
safety
manual; ALI/ST-90
ALI Safety Tips
card; ANSI/ALI ALOIM-2000,
American National Standard for
Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance
; and in the case
of frame engaging lifts, ALI/LP-GUIDE,
Vehicle Lifting Points/Quick Reference Guide for Frame
Engaging Lifts
; in a conspicuous location in the lift area convenient to the operator.
• Shall not modify the lift in any manner without the prior written consent of the manufacturer.
• Shall provide necessary lockout/tagout means for energy sources per ANSI Z244.1-1982 (R1993),
Safety Requirements for the Lockout/Tagout of Energy Sources
, before beginning any lift repairs.
Lift Lockout/Tagout Procedure
Purpose
This procedure establishes the minimum requirements for the lockout of energy that could cause
injury to personnel by the operation of lifts in need of repair or being serviced. All employees shall
comply with this procedure.
Responsibility
The responsibility for assuring that this procedure is followed is binding upon all employees and
service personnel from outside service companies (i.e., Authorized Installers, contactors, etc.). All
employees shall be instructed in the safety significance of the lockout procedure by the facility
owner/manager. Each new or transferred employee along with visiting outside service personnel shall
be instructed by the owner/manager (or assigned designee) in the purpose and use of the lockout
procedure.
