5
Installation
1
Connect DA-EC1101R's RJ45 port to the Video In port or a hub attached to a Video
In port of DirectIP™ NVR using a network cable.
2
Connect DA-EC1101T's RJ45 port to the network port of DirectIP™ camera using
a network cable.
If DA-EC1101T EOC requires PoE power supply, turn the PoE Switch of DA-EC1101T to On.
3
Connect DA-EC1101R and DA-EC1101T using a coaxial cable.
4
Connect the included 48V DC adapter to the Power Input port of DA-EC1101R.
First, connect the adapter to the product. Then, turn the device On. If the adapter is connected while the
switch is turned On, it may cause an electric spark. Be careful when using the product at a gas station or
near combustible substances.
5
DA-EC1101R and DC-EC1101T will turn on at the same time and the 48V DC LED
on the product will be lit.
6
Refer to the installation layout and install the product.
