Direct Air PHRV 140 страница 5 Скачать руководство пользователя

Страница: 5 / 28

PHRV Series

PHRV 150 & PHRV 200

Introducing the NEW PHRV series of Heat Recovery

Ventilators (HRV) by Powrmatic. Incoming fresh outdoor air

is filtered before it is heated by the stale outgoing air

through a polypropylene heat recovery core. The HRV then

distributes the preheated fresh filtered air throughout the

home by direct ductwork installed specifically for the HRV or

through the ductwork of a forced-air system.

FEATURES:

• Compact Design

• Electrostatic Filters (washable)

• Balancing Dampers Included In Installation Kit

(not factory installed)

• External Screw Type Dry Contacts For Push Button

Timers (RTS 2), Dehumidistats 1, Dehumidistat 2

& 5MR Intellitek control.

• Easy Core Guide Channels For Removing Core

• Better Packaging For More Protection In Shipping

OPTIONAL CONTROLS

• 5MR

– Digital Multi-Function Control

• DEH. 2 – Mechanical Low Voltage Dehumidistat with

On/Off Switch

• DEH. 1 – Mechanical Low Voltage Dehumidistat

• RTS 2 – 15 Minute Push Button Timer

• AQS 1 – Air Quality Sensor

External screw type dry contacts (provided)

SPECIFICATIONS

CASE

22 gauge galvanized steel on the PHRV 200 & 24

gauge galvanized steel on the PHRV 150. Baked powder

coated paint, grey. Insulated with 1" (25 mm) high density

polystyrene foam to prevent condensation and meet the

requirements of the Underwriters Laboratories 94HB.

MOTORS

Two (2) German-manufactured, factory-balanced

ebm™ motors with backward curved blades. Motors come

with permanently lubricated sealed bearings guarantee long

life and maintenance-free operation. Seven (7) year warranty.

CORE

A polypropylene heat recovery core configured for an

efficient cross-flow ventilation. Core is 9" x 9" (229 x 229 mm)

with a 15" (380 mm) depth (PHRV 150) or 12" x 12" (305 x

305 mm) with a 15" (380 mm) depth (PHRV 200). Cores are

manufactured to withstand extreme temperature variations.

FILTERS

Two (2) Washable Electrostatic Panel Type Air Filters,

PHRV 150 is 8.5" (216mm) x 15" (380mm) x 0.125"

(3mm), PHRV 200 is 11.75" (298mm) x 15" (380mm) x

0.125" (3mm).

CONTROLS

External three (3) position (Low/Stand By/

Medium) rocker switch that will offer continuous ventilation.

Powrmatic offers a variety of external controls. (see optional

controls)

DEFROST

A preset 5 minute defrost sequence is activated at

an outdoor air temperature of 23ÞF (-5ÞC) and lower.

During the defrost sequence, the supply blower shuts down

& the exhaust blower switches into high speed to maximize

the effectiveness of the defrost strategy.

The unit then returns to normal operation for 25 minutes,

and continues cycle.

SERVICEABILITY

Core, filters, motors and drain pan can be

easily serviced through latched access door. Core

conveniently slides out with ease on an improved railing

system. Electrical box, placed on the outside of the unit, can

also be easily accessed.

Powrmatic, reserves the right to modify, at any time and without notice, any or all of its products’ features, designs, components and specifications to maintain their technological leadership position.

Содержание PHRV 140





























Результаты поиска

Содержание PHRV 140

Отзывы:

Похожие инструкции для PHRV 140

Бренды по названию

Популярные бренды

Direct Air PHRV 140, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание PHRV 140

Отзывы:

Похожие инструкции для PHRV 140

Бренды по названию

Популярные бренды