Warning
It is necessary to ensure safe operating conditions (among other things described in
this manual – to protect the device against direct strike of lightning, to use shielded cables
connecting the device to the PC or other peripherals).
It is not allowed to make any changes to
the device
– it will void warranty as well as legality of use.
Safety
The device has been designed and manufactured with utmost care for the safety of
installing and using. To ensure safe operation, the user should follow all warnings and
instructions in this manual and directions for use of the cooperating equipment (e.g. a PC).
Contents of the box
●
Antenna with assembled and sealed RouterBoard device, wireless adapter (card).
●
Power supply with PoE adapter.
During the delivery, make sure that the packaging is not damaged. In the case of any
damage you should not pick up the parcel or contact the vendor. Please, also check the
contents of the package shown in the list above.
Contents of the manual
This manual provides a detailed description of wireless
ULTIAIR
set, including its
installation, configuration, and operation. The user is obliged to read it carefully before
installation of the equipment and follow all instructions, especially those concerned with
safety.
Safe use rules
Each wireless transmission device
ULTIAIR
complies to international electric code.
Below there are the basic rules of safe operation of the devices:
●
power socket must be grounded in accordance with applicable regulations,
●
the set has to be installed and reviewed prior to switching on power supply,
●
before any maintenance the power has to be switched off,
●
the device is disabled only when all power cables and connections with other
equipment are completely disconnected,
●
it is not allowed to use power cables with broken insulation,
●
all installation work should be done by qualified personnel only,
●
the devices are not suitable for use in flammable environments,
●
the devices have to be protected against access of unauthorized people, especially
children,
●
the parts of the set have to be solidly mounted,
●
if the device is moved from a cool place to a warm environment, the moisture can
prevent proper operation – one should wait until the moisture has evaporated.
3
Содержание Ultiair 319KC
