1. INTRODUCTION
1.1 Basic information
MikroTik RouterOS is a special operating system based on Linux, designed for
building advanced access points and routers with bandwidth management. Despite
advanced functions the system is easy to manage via WWW, system console, or a special,
user-friendly tool - Winbox.
1.2 License levels
License level
3 (WISPCPE)
4 (WISP)
Upgradable to
ROS v3.x
ROS v3.x
Initial Config Support
-
15 days
Wireless AP
-
yes
Wireless Client and Bridge
yes
yes
RIP, OSPF, BGP protocols
yes
(v3 x86 =
RIP)
yes
(v3 x86 = RIP,
OSPF)
EoIP tunnels
no limit (V3 = 1)
no limit
PPPoE tunnels
200 (V3 = 1)
200
PPTP tunnels
200 (V3 = 1)
200
L2TP tunnels
200 (V3 = 1)
200
VLAN interfaces
no limit
(V3 = 1)
no limit
P2P firewall rules
no limit
(V3 = 1)
no limit
NAT rules
no limit
no limit
HotSpot active users
1
200
RADIUS client
yes
yes
Queues
no limit
no limit
Web proxy
yes
yes
Synchronous interfaces
-
yes
User manager active
sessions
10 (v3 10)
10 (v3 20)
5
Содержание Ultiair 319KC
