Installation of the RF Unit
239
3
4
6
6 Befestigungsbohrungen 5 mm
The weather proof cabinet has 6
mounting holes.
The backside of the cabinet
should be mounted on a flat
surface.
Hole spacing is 13.62”H x 9.41”W
(346mm x 239mm)
Connect the ground bolt between
the two antenna insulators with
the lightning rod.
An application example
If the RF Unit is installed outside, a small roof or overhang is recommended to protect the
unit from direct sun. If the tuner is not protected, the excessive temperatures inside the
cabinet could damage the antenna tuner elements.
Page 6 of 24
