Controller Connections
(Rear Side)
RF Probe
25-pin. Control Cable
to Tuner Unit
Power Supply
If the Memory Erase Button is pressed, all
memory locations associated with the band
indicated on the LC Display will be erased
Cinch-Connectors to
loop-in the key line of
Power Amp
RF Probe Installation
Probe Connector to
Controller AT-615
The connection to
the Transceiver
should made as
short as possible.
To Power
Amplifier
RF Probe
If possible, the RF Probe should be attached directly to the antenna jack of the transceiver
using an adaptor or a very short cable.
Page 4 of 24
