Diono Radian R100, Инструкция по эксплуатации

Страница: 43 / 60

F
o
rw
a
rd
-F
a
c
ing
I
ns
ta
ll
a
ti
o
n
43
Forward-facing Lap-Shoulder Belt
Installation
For a step-by-step installation, watch our video
here: www.youtube.com/DionoUSA
Unfasten fabric side panels and
reach behind cover for easy
access to belt path. Place car seat
in forward-facing position with
entire bottom flat on the vehicle
seat and back of car seat flat
against vehicle seat back. A gap is
acceptable as long as top of car
seat is firmly touching the vehicle
head rest or seat back.
If available, route the Top Tether
strap to the appropriate anchor
and connect. Do not tighten until
car seat is installed (
See pages 47
for Top Tether installation
instructions).
WARNING:
• Do NOT use detachable base when car seat is forward-facing.
• Do NOT place infant in a forward-facing car seat until they are at
least 1 year old and 20 lbs.
• Diono and the American Academy of Pediatrics recommend
keeping children rear-facing to the maximum rear-facing weight
or height capacities of this car seat (50 lbs. or head is less than
1.5” from top of shell).
• ALWAYS use Safe Stop® for a forward-facing child who weighs
below 40 lbs. Do NOT use Safe Stop® for children over 40 lbs
(See
page 38).
• Read vehicle manual to learn more about top tether anchors, air
bags, seating positions, warnings, and how a vehicle seat belt
locks.
• Adjustable bottom MUST be used for children 25 lbs. and
over in a forward-facing installation. Do NOT adjust bottom for
children under 25 lbs.