Diono Radian R100, Инструкция по эксплуатации

Страница: 37 / 60

R
e
a
r-
Fa
ci
n
g
I
n
st
a
ll
at
io
n
37
Rear-facing Top Tether Installation
WARNING:
• Rear-facing top tether connector strap is ONLY to be used in
rear-facing installations.
For a step-by-step installation, watch our video
here: www.youtube.com/DionoUSA
WARNING:
• Do NOT modify vehicle without approval from vehicle
manufacturer or authorized vehicle dealer.
• Do NOT attach rear-facing top tether connector strap to any
movable mechanism of a vehicle seat. Consult vehicle manual for
recommended rear-facing tether anchor locations.
Rear-facing Top Tether Connector Strap
With some vehicle models, the top tether may not fit structural
parts of vehicle seat or there may not be a suitable anchorage
point for top tether hook. It may be necessary to use the tether
connecting strap to create a tether anchorage point:
Locate the track of
vehicle seat that is
bolted directly to
vehicle frame.
Wrap tether connecting
strap around the track,
and thread metal 'D"
ring through the loop
at the end of the tether
connecting strap. Pull
strap to form a knot.
(
See Figure 1 )
Now, use metal ‘D’ ring as an anchorage point for top tether
metal hook.
Tether
connecting
strap
Tether
hook
Metal “D” Ring
Leg of
seat track
Note: Some vehicles
have a tether anchor
bracket attached to the
vehicle seat frame
which can be used
instead of the tether
connecting strap. If so,
connect top tether
metal hook directly to
bracket. Check your
vehicle manual or call
the manufacturer.
Tether anchor
bracket
Vehicle seat
adjustment track
Toward front
of vehicle
Back of the
front seat