R
e
a
r-
Fa
ci
n
g
I
n
st
a
llat
io
n
34
Infant Support Cushion: You may use the cushions up to any
weight for maximum comfort and support.
WARNING:
• Make sure vehicle seat belt is properly locked. If your seat belt does
not lock,
(See page 19 for instructions on using the locking clip).
• Failure to properly lock seat belt will result in an unsafe installation
that will greatly increase the potential for injury or death to the child
in an accident.
• Carefully read vehicle owner’s manual to determine seat belt locking
requirements or contact vehicle manufacturer.
Push down on the bottom
of the car seat while
pulling all the slack out of
the belt. It’s best to do
this close to the buckle.
Be sure belt is locked and
the car seat does not
move more than 1 inch
side-to-side, front-to-back
at the belt path.
Rear-facing Lap-Shoulder Belt
Installation (cont.)
Tip: If available, add rear-facing top tether connector strap to
appropriate anchorage and attach top tether strap (
See page 37
for installation instructions
).
Important: It may be necessary to move front vehicle seat
slightly forward to properly fit rear-facing car seat. The Diono
Angle Adjuster may be purchased separately to adjust recline, if
child can sit up unassisted and has full head control. Angle
Adjuster is not appropriate for a newborn.
❒
See final checklist on page 50
Содержание Radian R100
Страница 13: ...13 9 12 13 14 17 18 10 11 20 22 17 21 19 15...
