diono.com
radian 3QX
38
39
REAR
–
FA
CING
REAR
–
FA
CING
INSTALL USING LAP BELT WITH 5-POINT HARNESS:
4–50 lb (1.8–22.7 kg)
1. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 33).
The entire
seat bottom should sit flat on
the vehicle seat.
2. Slide the vehicle seat belt
through the rear-facing belt
path and out the other side
.
Buckle it. The seat belt should
lie flat and not be twisted.
3. Tighten the vehicle seat belt.
Press down firmly in the center
of the car seat. To tighten, pull
on the loose end of the vehicle
lap belt.
4. Test for tightness.
Grab the side of the seat where
the vehicle seat belt is and
slide the car seat side-to-side
and front-to-back. If the seat
moves less than 1 in. (2.5 cm),
it is tight enough. Do not test
by grasping the top or back of
the seat.
1
2
3
4
