diono.com
radian 3QX
36
37
REAR
–
FA
CING
REAR
–
FA
CING
3. IMPORTANT!
Tighten the
vehicle seat belt.
Press down firmly in the center
of the car seat. To tighten, pull
on the loose end of the vehicle
lap/shoulder belt.
4. Test for tightness.
Grab the side of the seat where
the vehicle seat belt is and
slide the car seat side-to-side
and front-to-back. If the seat
moves less than 1 in. (2.5 cm),
it is tight enough. Do not test
by grasping the top or back of
the seat.
INSTALL USING LAP/SHOULDER BELT WITH
5-POINT HARNESS : 4–50 lb (1.8–22.7 kg)
1. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 33).
The entire seat bottom should
sit flat on the vehicle seat.
2. Slide the vehicle seat belt
through the rear-facing belt
path and out the other side.
Buckle it. The seat belt should
lie flat and not be twisted.
1
2
3
4
