Attaching the LOCO-V2 to the Raspberry Pi
The LOCO-V2 comes with standard accessories to mount it to the Raspberry Pi.
•
LOCO with gold plated 40 pin header.
•
4x nylon m2,5 female – female spacer 18 mm.
•
4x nylon m2,5 male – female spacer 10 mm.
•
8x m2,5 screws.
•
5.5mm /2.1mm DC adapter plug
The full range of Dion Audio LOCO-V2 accessories are available directly from our website:
www.dionaudio.nl
The following pictures shows how to mount the LOCO-V2 to the Raspberry Pi.
Connecting The loudspeakers
The LOCO-V2 is able to delivers up to 153 Watt at 4 ohm per channel, and the power amplifier
is protected against faults with short-circuit protection, thermal protection, as well as over-
voltage, under-voltage, and DC protection. However be careful when connecting the wires.
Avoid short-circuiting the loudspeaker outputs because it can result in COMPLETELY DAMAGING
THE LOCO-V2.
