Test procedure
Before a LOCO-V2 board is sold, it is tested on functionality and reliability. The LOCO-V2 is
connected to a 24 V/120 VA power-supply, and the output power is measured by loading the
LOCO-V2 with a white noise signal at 10 watts for 1 hour, and at 72 watts for ten minutes. If
the LOCO-V2 passes these tests, all voltages are being measured at the regulators, at the
filters, and at the capacitors. The output signal is being tested on noise and distortion. As
finishing touch, music is played through the LOCO-V2 for one hour.
WWW.DIONAUDIO.NL
