DRY LOCATION
1 OF 5
IG050919-4.0
DMX ZONE CONTROLLER
INSTALLATION GUIDE
®
COLOR-CHANGING
INSTALLATION GUIDE
DMX WALL MOUNT ZONE CONTROLLER
24VDC
12VDC
COMPATIBLE
DMX
SAFETY & WARNINGS
QUICK SPECS / MODELS
TOOLS FOR INSTALL
Phillips-head screwdriver
INSTALLATION
DI-DMX-WIFI-WMUS-3Z-WH
Input Voltage
12 - 24VDC Constant Voltage
Output Signal
DMX512
WiFi Transmitting
Distance
40 ft.
®
1 2 3
Flat-head screwdriver
Mini flat-head screwdriver
Wire stripper
1
TURN POWER OFF AT CIRCUIT BREAKER
SHOCK HAZARD!
May result in serious injury or death.
Turn power OFF at circuit breaker prior to installation.
2
DETERMINE LOCATION TO INSTALL COMPONENTS
®
1 2 3
V+
V-
V+
CH1 - R
CH2 - G
CH3 - B
CH4 - W
0-5 0-9 0-9
Data IN
Data OUT
LED Driver(s)
Controller
DMX Decoder
Luminaire
See
SYSTEM DIAGRAM
for more information. DMX luminaires can be
connected directly to controller. DMX Decoders are only utilized to
control Non-DMX type luminaires.
3
If system remains unresponsive or is working improperly, turn OFF main
power at breaker and verify all connections.
4
CONNECT COMPONENTS
Only use copper wiring. Reference
WIRING CONNECTIONS
and
SYSTEM
DIAGRAM
further in this guide for visuals.
TURN POWER ON AT CIRCUIT BREAKER
1. Install in accordance with national and local electrical code
regulations.
2. This product is intended to be installed and serviced by a qualified,
licensed electrician.
3. DO NOT connect directly to high voltage power. Install with a
compatible Class 2 constant voltage LED driver (power supply).
4. Only install compatible 12V and 24VDC constant voltage luminaires.
5. This product is rated for indoor installation and is not protected
against moisture.
6. Do not modify product beyond instructions or warranty will be void.
