Dinstar DAG1000-4FXS, Руководство пользователя, Страница: 30 / 34

Page 28
Port Config
This page is used to config the account and password of DAG serial, call transfer, call waiting and
do-not-disturb service. Port 0 maps to FXS0, while Port n maps to FXS n.
FIGURE 21:Port Config
Table 12 Port Config
SIP User ID
User account information, provided by VoIP service provider (ITSP). Usually
in the form of digit similar to phone number or actually a phone number.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
Authenticate Password
SIP service subscriber’s account password.
TX/RX Gain
Handset volume adjustment.
•
RX is for receiving volume,
•
T X is for transmission volume.
Default values are -6dB for both parameters. Loudest volume: +6dB Lowest
volume: -6dB.
Offhook Auto-Dial
This parameter allows users to configure a User ID or extension number to
be automatically dialed upon off-hook. Only the user part of a SIP address
needs is entered here. The
DAG serial will
automatically append the “@”
and the host portion of the corresponding SIP address.
Unconditional call
forwarding
All incoming calls are transferred appointed phone.
Busy call forwarding Call will transfer appointed phone when Busy.