Dinstar DAG1000-4FXS, Руководство пользователя, Страница: 18 / 34

Page 16
FIGURE 6: Web trees
SYSREM INFO
The system information shows the current status of the system, including IP address, running
time, network traffic, version and FXS ports status.
FIGURE 7: System Info
T
ABLE
8: System Info Definitions
MAC Address
The device ID in HEX format. This is needed for ISP troubleshooting. Note
there are separate MAC addresses for the WAN side and the LAN side.
Network Mode
Route mode or bridge mode, if it is bridge, WAN Port display
Network ,
and the wan port as same as the LAN port
WAN port
Shows WAN IP address of DAG serial ,
DHCP mode : all the field values for the Static IP mode are not used (even
though they are still saved in the Flash memory.) The DAG serial acquires
its IP address from the first DHCP server it discovers from the LAN it is
connected.
Using the PPPoE feature : set the PPPoE account settings. The DAG serial
will establish a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These
fields are set to zero by default.
LAN port
Shows LAN IP address of DAG1000 .if network Mode is bridge, LAN port
will no display.