DAG Series FXO Voice Gateway User Manual
27
Dinstar Technologies Co., Ltd.
FXO.
Detect CID
：
to enable caller ID detection for incoming calls. The gateway has two
modes: Before ring and after ring.
Before ring:
the FXO port will detect CID first, then ringing to the port. It takes
about few seconds to detect CID in generally.
After ring:
the FXO port will ringing to FXO port then start to detect CID
Send Original CID when Call from PSTN
From Mode when CID Is Available
Used to configure "From" Mode when Caller ID Is Available when call from PSTN
to VoIP. The SIP header should be matched with follow formats:
Display/CID: From: “Mike”<sip:[email protected]>;tag=51088abb
User ID/CID: From:”201”<sip:[email protected]>;tag=51088abb
CID/CID: From: Caller ID <sip: Caller
[email protected]>;tag=51088abb
CID/User ID: From:”Caller ID”<sip:[email protected]>;tag=51088abb
From Mode when Caller ID Is Unavailable
Used to configure "From" Mode when Caller ID Is Unavailable
Anonymous : From: <sip: Anonymous @host.com>;tag=51088abb
Display/User ID: From: “Mike”<sip: 201 @host.com>;tag=51088abb
Keep onhook until callee answered
When the gateway get incoming call from PSTN network, the modular will answer the
call then start to DTMF or route to destination hotline number. While this option
enabled, the modular won’t answer the call but routing to destination hotline number
till it getting answer.
Play Hint to FXO
Enable this function, when call from PSTN to FXO port, FXO port will play prompt tone
“please dial the extension number”.
Allow Call to SIP Server without Registration
To enable peer to peer call without registration.
Outgoing call Parameters
