2
How to lift up the welding power source
3
Connection to the electrical supply
The pointing out of any difficulties and their elimination 7
Procedure for welder assembly and disassembly
Digital interface PCB replacement
Meaning of graphic symbols on welding power source 8
Description
DIX TIG GO 1406.M HF
with digital control represents the very
latest evolution in direct current weld generators with INVERTER
technology. This powerful 100 KHz generator, based on the latest
generation IGBT, fitted with a planar transformer, makes it pos-
sible to TIG weld any metal except for aluminium and its alloys.
DIX TIG GO 1406.M HF
, also excellent for electrode welding, with
its lightness and compactness and first-rate welding character-
istics, is ideal for using for maintenance, erection and light steel
structural works.
Features
Main features are:
•
Innovative and compact design.
•
Compact size and light weight for easy transportation.
•
Load-bearing structure with panels made of impact-resistant fi-
bre.
•
Robust handle integrated into the chassis.
•
Control panel protected against accidental impact.
•
Sloping front control panel, easy to read and adjust and highly
visible from any direction.
•
IP 23 S protection class and dust-proof electronic components,
thanks to the innovative “Tunnel” fan cooling system, allow their
use in the toughest work environments.
•
Digital control, regulation and monitoring of all welding param-
eters.
•
Digital display for pre-setting welding parameters.
•
Digital ammeter is standard fittings, with pre-setting of welding
current and saving of the latest value (Hold function).
•
Feature that makes it possible to save and call up personal-
ised welding programs (only adjustable with the control panel).
•
Self-diagnosis device.
•
Overheating thermostatic protection.
•
Automatic compensation for mains voltage fluctuations within
±20%.
•
Safety barrier against excess voltage from mains.
•
Electromagnetic disturbance is reduced due to high frequency
being involved only during the arc ignition phase.
•
“Energy Saving” function that starts ventilation of the generator
only when necessary.
•
This generator also conforms to all the standards and directives
in force in the European Community.
•
TIG
- Excellent TIG welding characteristics.
- High frequency arc striking of TIG welding, precise and effi-
cient even from long distance.
- Using special TIG torches allows remote adjustment of weld-
ing current directly from the torch.
- Standard built-in pulsation with provision for entering the SYN
Pulse function (only adjustable with the control panel).
•
MMA
- The VRD (Voltage Reduction Device) can be activated, which
reduces voltages to below 12 V, which means that the weld-
ing power source can be used in ambient conditions in which
Introduction
Thank you for buying our product.
In order to get the best performance out of the plant and ensure the
maximum lifespan of its parts, the use and maintenance instruc-
tions contained in this manual must be read and strictly complied
with, as well as
the safety instructions contained in the rele-
vant folder
. If repairs to the plant are required, we recommend that
our clients contact our service centre workshops, as they have the
necessary equipment and personnel that are specifically trained
and constantly updated.
All our welding power sources and equipment are constantly de-
veloped and so changes may be made in terms of their construc-
tion and features.
Copyright © 2018 DINSE G.m.b.H., Hamburg.
These instructions or excerpts there of shall not be duplicated, transla-
ted or reproduced, nor shall they be stored, processed, transmitted or
distributed by any electronic means without the prior written permission
of DINSE G.m.b.H.
D I N S E G . m . b . H .
Tarpen 36 • D-22419 Hamburg
Tel. +49 (0)40 658 75-0
Fax +49 (0)40 658 75-200
[email protected] – www.dinse.eu
Содержание DIX TIG GO 1406.M HF
Страница 9: ...9...
