DINSEO DIX TIG GO 1406.M HF, Руководство по эксплуатации

Страница: 10 / 14

10
Introduction
This manual describes the functions on and how to use the fol-
lowing control panels:
Control panel
WELDING PARAMETERS
WELDING PROCESS
VRD
DISPLAY WELDING MODE
ENCODER KNOB
■
DISPLAY
Displays the selections made using the various keys (with corre-
sponding LED on or flashing) and regulated using the ENCOD-
ER KNOB.
■
WELDING PROCESS
The welding machine offers 3 TIG/Electrode welding processes.
Each time the button is pushed, the welding machine switches to
select the welding process indicated by the LED that stays lit, in
the following order:
L1 TIG with HF ignition
L2 TIG with “Lift” type ignition
L3 ELECTRODE (MMA)
L1
L3
L2
■
VRD
The Voltage Reduction Device (VRD) is a safety device that re-
duces the voltage. It prevents voltages forming on the output ter-
minals that may pose a danger to people.
Two-tone LED (off - red - green) indicates enabling of the VRD
device.
The standard, preset settings for the firm do not activate the VRD
function on the welding machine and so this LED is normally off.
To activate the VRD device, see the relevant paragraph.
Introduction 10
Displaying the software version installed 11
Electrode welding (MMA) 11
TIG welding 12
TIG welding with the SPOT WELDING function on 12
TIG welding - Welding parameters 13
Activating the VRD device 13
Auxiliary functions 14
Factory default 14
Error and protection conditions 14