DINSE DIX GO 1156.M Puls, Руководство по эксплуатации

Страница: 14 / 36

14
Control panel
Welding Power Source
Introduction 13
KEY AND KNOB COMMANDS 14
Control panel 14
DISPLAY AND LED INDICATIONS 15
Switching on the welding machine and initial screen 15
Viewing the software version installed 15
Loading of the wire 16
Special functions “Fx” 16
SETUP Menu 18
FACTORY DEFAULT (FAC) 18
TIMER ARC ON 18
TIMER WELDING MACHINE ON 18
ERROR LOG 19
TEST 19
Menu SPECIAL FUNCTIONS 20
SAFETY CALIBRATION CODE (SCC) 20
MOTOR CALIBRATION (Mot CAL) 20
ARC LENGTH ADJUST 21
SWITCH 21
WATER COOLING MODE 21
PASSWORD 22
BLOCKS 22
SERIAL NUMBER 22
MIG-MAG synergic / MIG pulse / double pulsed MIG 23
1 - WELDING PROCESS SELECTION 23
2 - SELECTION OF WELDING PROGRAMME 23
3 - WELDING MODE SELECTION 24
4 - SPECIAL FUNCTIONS “Fx” SELECTION 24
5 - PRE-SETTING 25
6 - WELDING 25
7 - HOLD 25
MIG-MAG manual 26
1 - WELDING PROCESS SELECTION 26
2 - WELDING MODE SELECTION 26
3 - SPECIAL FUNCTIONS “Fx” SELECTION 26
4 - PRE-SETTING 27
5 - WELDING 27
6 - HOLD 27
Special processes 28
Electrode (MMA) 28
1 - WELDING PROCESS SELECTION 28
2 - SELECTION OF WELDING PROGRAM 28
3 - SPECIAL FUNCTIONS “Fx” SELECTION 29
4 - PRE-SETTING 29
5 - WELDING 29
6 - HOLD 30
7 - ACTIVATING THE VRD DEVICE 30
TIG with “Lift” striking 30
1 - WELDING PROCESS SELECTION 30
2 - SPECIAL FUNCTIONS “Fx” SELECTION 30
3 - PRE-SETTING 31
4 - WELDING 31
5 - HOLD 31
JOB 32
1 - CREATING AND SAVING A JOB 32
2 - JOB SELECTION 32
3 - PRE-SETTING / VIEWING MEMORISED JOB
DATA 32
4 - WELDING 33
5 - HOLD 33
6 - MODIFICATION AND OVERWRITING OF A
MEMORISED JOB
33
7 - DELETING A JOB SAVED 33
Error condition 34
Introduction
Il presente manuale contiene tutte le informazioni necessarie per
This manual contains all the information necessary to make the
best use of this control panel. This control panel is specifically for
multi-process welding machines: MIG-MAG, PULSED MIG, DOU-
BLE PULSED MIG, MMA and TIG.