Dinolift 10196, Руководство по эксплуатации

Страница: 37 / 59

37
5.3.2. Using the driving device
The hydraulic driving device is intended for moving the lift within the work area if the towing
vehicle cannot be used.
During transfer in rough terrain, always try to position yourself higher than the
machine.
1. Turn the selector switch 1 to position “LCB”.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
2. Make sure that the platform is in the transport position and the outriggers have been
lifted to the upper position.
3. Make sure that the mains cable is long enough to cover the whole travel distance
4. Press the driving devices against the wheels on both sides.
5. Release the parking brake
6. Drive the unit by turning the levers of the manual directional valve in the desired driving
direction. Use the right-hand lever to drive the right wheel, and the left-hand lever to
drive the left wheel.
Backward
Forward
Connected
Released
DANGER
WARNING
CAUTION
NOTICE
Do not drive the jockey wheel into obstacles or potholes. If one of the wheels bumps
into an obstacle, the lift may turn abruptly.