Dinolift 10196, Руководство по эксплуатации

Страница: 32 / 59

32
Operating instructions • DINO 105TL
5.2. OPERATION
Carry out all the daily maintenance routines and inspections in accordance with the
maintenance instructions before operating the lift. Failure to check the safety devices
may cause a serious injury or make the consequences of an accident worse.
DANGER
WARNING
CAUTION
NOTICE
5.2.1. Operating the lift from the chassis control centre
1. Turn the selector switch Q1 to the position LCB – chassis control
centre.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
2. Select the desired movement speed by depressing the speed
selector switch. Drive the boom and the platform using the control
levers in the chassis control centre:
4CB6925
230VAC
- extending and retracting the telescope
- lifting and lowering the boom
- turning the boom
The movement will stop if either the control lever for the movement
or the speed selector switch is released.
3. Before starting the operation, lift the platform from the tow-bar and
turn it to the side so that you can lower the boom.
4. Extend the telescope as much as is necessary to ensure that
stepping onto the platform is safe.
Do not damage the tow-bar jockey wheel!
DANGER
WARNING
CAUTION
NOTICE
Adjusting the position of the platform from the chassis control centre:
The levelling system of the platform will automatically keep the
platform level during the movements. As necessary, the position can be
corrected.
Carry out the levelling of the platform while the lift is in the support
position (the outriggers in the lower position). Adjust the position of the
platform with the boom in the level position. No persons allowed on the
platform during the adjustment.
The position of the platform may be adjusted from the chassis control
centre in the following way:
1. Turn the selector switch Q1 to the position LCB.
2. Depress the speed selector switch
3. Select the desired direction of the correction movement using the
control lever (9).
4CB6925
230VAC