Beijing Dinghengtai Technology Co., Ltd.
Tel:86-10-52679667,57430056
http://www.dingtek.com
E-mail: [email protected]
Room 605, Building Botai B, Nanhudongyuan 122, Chaoyang District, Beijing, China 100102
Page 7
Power off alarm status symbol included in power in the location information. According to the
time interval upload it.
5, Custom alarm (high and low sensor alarm)
This type of terminal support 1 road low and 1 road high sensor
Sensor alarm status signs included in the location information. According to the time interval
upload it.
6, Robbery/SOS alarm
Rob/SOS alarm sign a included in the position in the information. When you press the alarm
button above 0.5 seconds, such as in robbery/SOS alarm conditions ,it would alarm.If you
under the alarm condition,it would cancel the alarm. When it alarms,the button’s light stays
on,when cancel the alarm,the button’s light off.
Alarm way: When the fist alarm,it would upload a message. It is according to time interval to
upload the message.
Cancel alarm way: The monitoring center send the calcelling alarm instructions.
7, Geo- fence alarm
After you set up the Geo-fence,when you run in and out of the fence,the terminal would
upload a hint information.
Alarm way: Triggered alarm.
Other
1 Mileage statistics
The in all moving position of GPS, the unit is m
The maximum is 16777215 meters. When it achieve to maximum value,it would re-caculate
the statistics from 0.
Statistical conditions: The vehicles power on and the GPS effective positioning.
2 Blind area
When the vehicles in GPRS signal blind area, the terminal will automatically save the
location data according to schedule resending time (When the car power on), after the
vehicles received the GPRS signal, the terminal would automatically send the saved datas
that in blind area to the monitoring center,it can save 1500 datas at most.
