Beijing Dinghengtai Technology Co., Ltd.
Tel:86-10-52679667,57430056
http://www.dingtek.com
E-mail: [email protected]
Room 605, Building Botai B, Nanhudongyuan 122, Chaoyang District, Beijing, China 100102
Page 6
stands for 0 x000000
4,Sending and receiving dispatching information and extension instructions
The monitoring center would send the dispatching text information or extension instructions
to the terminal.
This information send as ASCII code or BG2312 code, the content of the short message
would not exceed 240 bytes
5, Supports remote software upgrade
Manufacturer shall be in accordance with the operating
Alarm
1, Overspeed alarm witnesses settings
After you set up the over-speed alarm’s threshold value, if the vehicles’ speed is greater than
10km/h, and the time would stays for 10 seconds, it would alarm. The over speed signs are
include in the location information.
Alarm way: When the first alarm, it would upload a message. The rest alarm would according
to the scheduled time resending time’s interval to upload the message.
Cancel alarm way: You should send the cancelling alarm instructions to the terminal and the
vehicles’ running speed is smaller than overspeed alarm witnesses value. Send the
cancelling overspeed instructions and close the overspeed alarm.
2,Parking overtime alarm valve setting
After set up the parking overtime alarm valve, when the car’s speed is 0,and the time stays
or greater than the overtime alarm valve, it would alarm. Parking overtime’s sign is include in
the location information.
Alarm way:When the fist alarm, it would upload a message. The rest alarm would according
to the scheduled resending time’s interval to upload the message.
Cancel alarm way: Send the cancelling alarm instructions and the car’s running speed is
greater than 0
Send the cancelling alarm instructions and close the parking overtime alarm.
3, GPS antenna short circuit alarm
GPS antenna state signs are included in the location information. According to the time
interval to upload it.
4, Terminal power off alarm
