6
OPERATION
FILING GAS TANK
1.
Shut off engine and allow engine to completely cool
before refilling the gas tank. (Show Picture Of Off
button on Engine)
2.
Move to a well ventilated area, outdoors, away from
flames and sparks.
3.
Clean debris from area around the gas cap
4.
Loosen gas cap slowly. Please the cap on a clean, dry
surface. Picture of gas cap
5.
Carefully add fuel without spilling.
6.
Do not fil fas tank completely full, allow space for fuel to
expand.
7.
Immediately replace gas cap and tighten. Wipe off
spilled fuel and allow to dry before starting engine.
NORMAL OPERATION
1.
The clutch will transfer maximum power after about two hours of normal operation. During this break-in period clutch slippage
may occur. The clutch should be kept free of oil or other moisture for efficient operation.
2.
Drill holes without placing excessive body weight on the unit. The auger operates most efficiently with a shaving action caused
by the weight of the unit itself.
3.
Never run engine indoors. Exhaust fumes are deadly.
4.
Do not use an earth auger in the ice.
5.
To attach auger to powerhead, align hole at top of auger shaft with the output shaft hole. Insert 3/8 – 16x1-1/2” bolt and secure
bolt with provided 3/8 bi-way lock nut using a wrench.
NOTE:
The ends of the bolt should be flush with the auger collar. Bolt head and thread end should never go beyond earth collar.
USING THE SCREW TYPE, MANUAL VENTING GAS CAP
1.
Your power earth auger is equipped with a screw type, manual venting gas cap.
2.
Before starting the engine, turn the screw in the top of the gas cap all the way open (counterclockwise) to its venting position.
To ensure that gas will not spill during use, check that the gas cap is screwed on tightly and the gas cap screw is in
the venting position.
3.
After using the power earth auger and before putting away or transporting it in a vehicle, screw the gas cap screw on
(clockwise) tightly. This will prevent gas from leaking during storage. The gas cap will not leak gas during storage if the gas cap
is tight and the screw at the top is tight.
NOTE:
When storing unit in an upright position for pro-longed periods of time in warm weather, vent gas cap to prevent gas from leaking
from carburetor.
STOPPING THE ENGINE
Содержание 65CC
Страница 1: ...1 ...