DINGLI JCPT1523DC, Руководство оператора с информацией по обслуживанию

Страница: 37 / 66

OPERATOR
’S MANUAL
with Maintenance Information
Transport and Lifting Instructions
32
Observe and Obey:
√
Common sense and planning must be
applied to control the movement of the
machine when lifting it with a crane or
forklift.
√
The transport vehicle must be parked on a
level surface.
√
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
√
Be sure the vehicle capacity, loading
surfaces and chains or straps are sufficient
to withstand the machine weight. See the
serial label for the machine weight.
√
The machine must be on a level surface or
secured before releasing the brakes.
√
Do not drive the machine on a slope that
exceeds the slope or side slope rating. See
Driving on a Slope in the Operating
Instructions section.
√
If the slope of the transport vehicle bed
exceeds the maximum slope rating, the
machine must be loaded and unloaded
using a winch as described.
Free-wheel Configuration for
Winching
Chock the wheels to prevent the machine from
rolling.
2WD models: Release the non-steer wheel
brakes by turning over the torque hub
disconnect caps (see below).
4WD models: Release the wheel brakes by
turning over all four torque hub disconnect
caps (see below).
Be sure the winch line is properly secured to
the drive chassis tie points and the path is
clear of all obstructions.
Reverse the procedures described to
re-engage the brakes.
Disengage Position
Engage Position