Dinel GPLS-25 Series, Инструкция по эксплуатации

Страница: 9 / 14

9
© Dinel, s.r.o. GPLS-25
GPLS–25N–1–A–P cable 5 m
(1) planar electrode, (A) cable outlet with 5 m length fixed cable; (P) output type PNP.
GPLS–25N–0–C–S
(0) prismatic electrode, (C) electric connection with connector; (S) output type S (electronic switch).
10 . Order code
11 . Correct specification examples
GPLS – 25N – – – cable Length of cable in meters (variant “A“)
A – cable outlet (+ Spec. the length of the cable)
C
– connector (socket not included in the sensor,
see accessories for recommended type)
Electrode
type:
0 – Prismatic (refracted)
1
– Planar
Electric
connection:
P – PNP (open collector)
S – 2-wire electronic switch
Type of
output:
12 . Accessories
13 . Safety, protection and compatibility
The level sensor is equipped with a protection against electric shock on electrode, polarity, over-
voltage and short-term current overload on the output.
Protection against dangerous contact is ensured by supplying safe voltage according to ČSN 33
2000-4-41 (SELV).
Electromagnetic compatibility is provided by conformity with standards EN 55011(B), EN 61326-1,
EN 61000-4-2 (A, 8 kV), EN 61000-4-3 (A, 10 V), EN 61000-4-4 (A, 2 kV), EN 61000-4-5 (B, 1
kV), EN 61000-4-6 (A, 3 V) and EN 61000-4-8 (A, 30 A).
This equipment has been issued a declaration of conformity in accordance with Act 90/2016 Coll.
and subsequent amendments. The delivered electrical equipment meets the requirements of the
applicable government regulations on safety and electromagnetic compatibility.
Standard - included in the level sensors price Optional - for extra charge
• 2 pcs of Plastic straps 2,5 x 200 mm
• 1 pc of Double-side self adhesive tape
(GPLS–25N–1)
• 1 pc of Magnetic pen MP–8
• Connector ELKA KV 3308