Dinel GPLS-25 Series, Инструкция по эксплуатации

Страница: 10 / 14

GPLS-25 © Dinel, s.r.o. 10
14 . Use, operation and maintenance
15 . General warranty conditions
The manufacturer warrants from the date of delivery that this product will have the specified char -
acteristics as stated in the technical specifications for a period of 3 years.
The manufacturer is liable for defects found during the warranty period and claimed in writing.
The warranty does not cover defects caused by improper handling or failure to comply with the
technical specifications.
The warranty is void if the customer or a third party makes changes or modifications to the product,
if the product is mechanically or chemically damaged, or if the serial number is illegible.
To make a claim, the warranty certificate must be presented.
In the event of a legitimate claim, we will repair or replace the defective product. In both cases, the
warranty period will be extended by the repair period.
The sensor requires no operator to operate. During operation, the operator of the technological unit is
informed about the level of the measured substance in the status gauge by an LED signalling diode.
The maintenance of the device consists in regular checking of the cable integrity and removal of
dirt from the back side of the sensor. It is forbidden to make any changes to the device without the
manufacturer‘s consent. Any repairs must be carried out only by the manufacturer of the device
or by a service organisation authorised by him.
Installation, operation and maintenance of the equipment must be carried out in accordance with
these technical conditions and the provisions of the applicable standards must be observed.