Dimplex SI 30CS, Инструкция по установке и эксплуатации

Страница: 20 / 56

E-8
English
12
12 Device Information
Device information for brine-to-water heat pumps for heating purposes
1 Type and order code SI 30CS SI 70CS
2 Design
2.1 Degree of protection according to EN 60 529 IP24 IP24
2.2 Installation Location Indoors Indoors
3 Performance data
3.1 Operating temperature limits:
Heating water flow °C Up to 55 Up to 55
Brine (heat source) °C -5 to +25 -5 to +25
Antifreeze Monoethylene glycol Monoethylene glycol
Minimum brine concentration (-13 °C freezing temperature) 25 % 25 %
3.2 Temperature spread of heating water at B0 / W35K 9.6 9.7
3.3 Heat output / COP at B-5 / W55
1
kW / ---
2
1. This data indicates the size and capacity of the system according to EN 255. For an analysis of the economic and energy efficiency of the system, both the bivalence point and
the regulation should also be taken into consideration. The specified values, e.g. B10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow
temperature 55 °C.
2. Operation with 2 compressors
27.8 / 2.4 58.5 / 2.4
kW / ---
3
3. Operation with 1 compressors
10.6 / 1.8 26.8 / 2.2
at B0 / W50
1
kW / ---
2
31.5 / 2.9 67.2 / 3.0
kW / ---
3
16.0 / 3.3 35.0 / 3.1
at B0 / W35
1
kW / ---
2
32.4 / 4.1 67.8 / 4.1
kW / ---
3 17.6 / 4.4 37.2 / 4.4
3.4 Sound power level dB(A) 59 69
3.5 Heating water flow with an internal pressure
differential of
m³/h / Pa
2.9 / 9000 6.0 / 6000
3.6 Brine throughput with an internal pressure
differential (heat source) of
m³/h / Pa
8.4 / 15000 16.0 / 12500
3.7 Refrigerant; total filling weight type / kg R407C / 6.7 R407C / 12.0
3.8 Lubricant; total filling weight type / litres Polyolester (POE) / 3.54 Polyolester (POE) / 8.2
4 Dimensions, connections and weight
4.1 Device dimensions without connections
4
H x W x L mm
4. Note that additional space is required for pipe connections, operation and maintenance.
830 x 1480 x 890 830 x 1480 x 890
4.2 Device connections to heating system Inch G 1 1/4'' external G 2'' external
4.3 Device connections to heat source Inch G 1 1/2'' external G 2'' external
4.4 Weight of the transportable unit(s) incl. packing kg 299 450
5 Electrical Connection
5.1 Nominal voltage; fuse protection V / A 400 / 35 400 / 63
5.2 Nominal power consumption
1
B0 W35 kW
7.82 16.34
5.3 Starting current with soft starter A 26 60
5.4 Nominal current B0 W35 / cos
ϕ
5) A / --- 14,1 / 0,8 29,8 / 0,8
5.5 max. power consumption of compressor protection
(per compressor)
W
70 70
6 Complies with the European safety regulations
5
5. See CE declaration of conformity
5
7 Additional model features
7.1 Water in device protected against freezing
6
6. The heat circulating pump and the heat pump controller must always be ready for operation.
Yes Yes
7.2 Performance levels 2 2
7.3 Controller internal/external External External