background image

This product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3.
These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
© GDC

Dimplex, a division of GDC Group Limited, Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF
Customer Help Line:  0845 600 5111  

Fax:  01489 773050  

Email:  [email protected] 

Website:  www.dimplex.co.uk

This  product  is  protected  by  intellectual  propery  rights  owned  by  the  GDC  Group  Ltd  or  members  of  the  Glen  Dimplex  Group  on  an 

international basis. The Glen Dimplex Group of Companies will actively protect these rights

.

A world of expertise

Cleaning

WARNING  -  ALWAYS  DISCONNECT  FROM  THE  POWER  SUPPLY  BEFORE 

CLEANING THE HEATER.
Before commencing cleaning, unplug the heater and allow it to cool. Disconnect the 

electricity supply to the appliance. 
The outside can be cleaned by wiping it over with a soft damp cloth and then dried. Do 

not use abrasive cleaning powders or furniture polish, as this can damage the surface 

finish.
To release the heater from the wall bracket for cleaning or redecoration, depress the 

latch on both brackets (See 

Fig.3) and hinge forward.

Recycling

For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be disposed of with household 

waste. Please recycle where facilities exist. Check with a Local Authority or retailer for 

recycling advice in your country.

After Sales Service

Your product is guaranteed for two years from the date of purchase.
Within this period we undertake to repair of exchange this product free of charge provided 

it has been installed and operated in accordance with these instructions.
Your rights under this guarantee are additional to your statutory rights, which in turn are 

not affected by this guarantee.
Should you require after sales information or assistance with this product please go to 

 

www.dimplex.co.uk where you will find our self help guide by clicking on “After Sales” 

or ring our helpdesk on 0845 600 5111 (UK) or 01 842 4833 (R.O.I.).
Spare parts are also available on the website 

www.dimplex.co.uk

Please do not return a faulty product to us in the first instance.
Please retain your receipt as proof of purchase.

Содержание Saletto LPP050










Отзывы: