General
The heater is designed for wall mounting on the
wall bracket supplied. It should only be operated
when in the upright position. - see
Fig.1 and
Fig.2.
All models are splashproof to IPX4 standard
and may be used in bathrooms, however not in
the immediate vicinity of baths, showers, water
connections, wash basins or swimming pools.
Before connecting the heater check that the supply
voltage is the same as that stated on the heater.
NOTE - Lit cigarettes, candles and oil burners,
combined with the convection effect of electric
heaters can cause soot deposits to build up on
the surface directly above and to the sides of the
heater. This is not a fault of the heater. Extensive
burning of candles or smoking in the operating
environment of this product can produce heavy
discolouration within a few months of use.
Dimensions
Model(s)
Watt A
(mm)
LPP050
0.5kW
746
LPP075
0.75kW
746
LPP100
1.0kW
877
LPP150
1.5kW
1142
Wall Mounting
IMPORTANT - The wall bracket supplied with
the appliance must be used. The heater should
be positioned observing the minimum clearances
stated around the heater - see
Fig.1 and Fig.2.
DO NOT locate the heater immediately below a
fixed socket or connection box.
Re
1.
move wall mounting bracket from the back
of the heater by depressing the spring latch at
the top of each bracket - see
Fig.3.
Fix
2.
the wall bracket securely to the wall through
the two screw holes provided.
Pre
3.
sent the heater to the wall bracket, and
engage lower slots in the back with the
bracket.
Rai
4.
se the heater to upright position and push
the heater onto bracket to engage top latch.
A
235
150
Min.
150 Min.
Fig. 1
Fig. 2
Fig. 3
100
170 Min.
50mm
50 Min.
Shelf
50mm
than
wider
Shelf
A
LPP050 672
LPP075 672
LPP100 803
LPP150 1068
250 Min.
A
