10
www.dimplex.com
Figure 6
Top
Cover
Transducer
Emitter
Wire Slot
Assembly
8.
Install the media on top, log
assembly or rock media and
media tray, so that the opening
is not blocked (Figure 7).
CAUTION:
Do not arrange the
rock media while the unit is running,
since the rocks may be hot.
9.
Make sure the On/Off switch
is switched to Off (refer to
Operating Instruction section).
10.
Plug the unit into a 15 Amp/
120 volt outlet.
Retaining
Tab
Figure 7
!
NOTE:
Rock media shown, install
log assembly in the same way.
Fan
Housing
Water Tank