25
Service
6. Using the 4 mm hex key supplied with the stove, remove the 3 M8x16 Hex screws that hold the
main baffle and the firebox together. Ensure that the baffle is supported and pushed back in
place so that it does not slip from the support ledge.
7.
Remove the main baffle. Note that there is a very small clearance between the width of the baffle
assembly and the firebox. For that reason, avoid twisting the baffle along its vertical axis and
jamming it while unhooking and taking it out of the firebox. To remove the main baffle, refer
to Figure 18:
①
Lift the baffle upward and then tilt it so that it comes down from the support ledge.
②
Once off the ledge, keep rotating
③
Simultaneously drop it down further
④
Take it out of the firebox.
8.
Follow above the procedure outlined in step 7 in reverse order to install the replacement baffle.
!
NOTE:
Ensure that the replacement baffle has an insulation blanket glued to the top.
Figure 18
