Dimplex LA 16ASR, Инструкция по монтажу и эксплуатации

Страница: 5 / 24

5
2.
2.
1.
1.
1.
3.
1.
1.
3.
2.
SCOPE OF DELIVERY
TRANSPORT
4
CAUTION!
3.2 Control Box
The control box is integrated in the heat pump. It can
be
folded downward after removing the lower front
panel and loosening the fastening screws located
at the top on the right.
The control box houses the mains terminals as well
as the power contactors and the soft start unit.
The plug connector for the control lead is located at
the bottom of the unit in the immediate vicinity of the
line feed-through through the bottom of the unit.
3.3 Heat Pump Controller
For the operation of your reversible air-to-water
heat pump, the reversible heat pump controller
included in the scope of delivery is to be used.
he heat pump controller is a comfortable electronic
regulating and control unit. It controls and monitors
the entire heating/cooling system as a function of
t h e o u t d o o r a i r t e m p e r a t u r e , t h e h o t w a t e r
preparation and the safety devices.
The external temperature sensor, to be mounted by
the customer, incl. fastening hardware is shipped
with the controller.
Method of functioning and operation of the heat pump
controller are described in the enclosed operating
manual.
TRANSPORT
During transport, the heat pump
must not be tilted more than 45
°
(in either direction).
The unit should be transported to the final installation
site on a wooden pallet. The baseline unit can be
transported either by means of a lift truck, a sack
trolley, or the like, or using 3/4" pipes to be put through
the openings provided in the base plate or the frame.
The heat pump and transport pallet
are only connected by the packaging film.
It is necessary to remove the lower cover panel to be
able to access the transport openings in the frame.
For this purpose, loosen two screws each in the base,
retract the panels and disengage them at the
Opening the cover Closing the cover
top. When reinstalling the panels, they should be
pushed upward by exerting slight pressure.
When slipping the carrying pipes through the frame,
care must be taken that no components are damaged.
CAUTION!