Operation
Before using the heater ensure that all warnings and instructions have been read carefully.
IMPORTANT: Objects or clothing must not be placed on the appliance.
IMPORTANT: Do not operate unless the castors have been securely fitted.
IMPORTANT: The element has been coated with a protective film which will burn off during the first few minutes of use and may
cause a small amount of fuming. This is quite normal, the fumes are non-toxic and will quickly disappear. We recommend that you open a
window to ventilate the room when using the heater for the first time.
To energise the heater simply plug it in. You will hear an audible beep and the Standby button will illuminate red. This indicates the
appliance is energised and ready for use.
Positioning the Heater
WARNING:
Always ensure the information outlined in IMPORTANT SAFETY INFORMATION section is strictly
adhered to.
Always ensure that the heater is stood on a firm, level base near to, but not directly underneath a suitable mains
supply socket.
Select the position for the heater ensuring there is clearance from any furniture and fittings of at least 300mm above the heater and
150mm each side and 300mm from the control and end panel. We recommend maximising the clearance where possible.
Screen & Control buttons
Screen
Runback timer icon
Sound off
Frost protect mode
Boost mode icons
Keylock
Week day
Time
Temperatue
Heat output
Active program
(Auto mode)
Auto mode status
Manual mode status
Adaptive start
Wireless connectivity
Control Buttons
Standby
Mode / Menu
Decrease Temperature
(Min 5ºC/43ºF)
Increase Temperature
(Max 30ºC/86ºF)
Program
Enter / select
