15
10. Remote control of the DigiHeat 8
The DigiHeat can be controlled remotely. Two
floating contacts on the rear of the DigiHeat are used
for various types of remote control. The unit can be
controlled remotely from GSM systems, bus systems,
central operating control systems or, in principle,
anything that can activate a floating contact.
Contacts
1 and GND
2 and GND
Control
open open
local
open closed
OUT
closed closed
AUTO
11. Room thermostat (P1=1)
Using the temperature sensor in the DigiHeat 8 to
control the room temperature in a zone may be
beneficial if the room has additional heating.
Additional heating may be from a woodburning stove,
fireplace, sunshine, etc. A typical example is a living
room with a woodburning stove or a fireplace. In
rooms without additional heating, the best comfort is
often achieved by using the temperature sensor in
the heater.
12. Technical data
Choice of 3 temperatures:
Out temperature/frost protection, 5-15°C
Reduction,
5-30°C
Comfort,
5-30°C
Control up to 8 individual zones
Freely programmable week programme
Radio communication 868 MHz
Range 80 m (uninterrupted)
Simple installation, no cabling
Simple installation/configuration
Out timer
Temporary programme override
Battery operation (2 x 1.5 V AAA)
12 V external power supply
Battery life around 2 years
Floating inputs for external control
Dimensions 134x80x27 mm (hxwxd) without table
support