background image

1.  Place the fan on a firm level surface. Connect the plug to a power supply and 

switch on the power. 

2.  Turn the fan 

ON

 by rotating the speed control knob on the motor housing in 

clockwise direction. 

3.  The fan has 3 

SPEEDS 

to choose from, "1" - Low, "2" - Medium, "3" - High.

4.  The airflow direction can be adjusted upward/downward by lifting up or pressing 

down the motor housing. 

NOTE:

 Only adjust the fan head when the unit is 

OFF

. Be careful not to insert your 

fingers through the guard. 

5.  Push the oscillating knob on the motor housing down to start 

OSCILLATION

. Pull 

the oscillation knob up to stop 

OSCILLATION

6.  Turn the speed control knob anti-clockwise to the “0” position to turn the fan 

OFF

Operation

Assembly

Lastly, attach the fan head to the motor - refer to Fig. 3 & the instructions below:

1.  Remove the protective sleeve from the motor shaft (12) and the four fixing 

screws from the motor housing. Attach the rear guard (4) to the motor housing 
(9) using the four screws you just removed. Ensure the handle is at the top.

2.  Place the fan blade (3) over the motor shaft (12) and tighten the fan blade 

screw completely, ensuring that it tightens against the flat part of the motor 
shaft.

3.  Remove the front guard screw and nut (2, 5) from the front guard and release 

the guard retaining clips (14) around the outside edge outwards. 

4.  Hang the front guard (1) by its hook over the top of the rear guard (4). Bring the 

front guard down to meet the rear guard and fit the guard screw (2) through 
the holes in the bottom edge of the guard and tighten with the nut (5). Finally 
push the clips inwards until the front guard is attached to the rear guard.

9

8

Содержание DCPF40CH








Отзывы: