IMPORTANT -
Due to the newness of the materials the heater will produce a slight smell for the fi rst few days of operation. ROOMS
MUST BE WELL VENTILATED AND YOUNG CHILDREN, CAGED BIRDS, OR PERSONS WITH RESPIRATORY COMPLAINTS MUST
NOT REMAIN IN CLOSE PROXIMITY TO THE HEATER DURING THE FIRST 48 HOURS OF THE COMMISSIONING PERIOD.
Cleaning
To maintain the external appearance of the radiator it need only be wiped over occasionally with a dry duster. During the summer
months, or at other times when the appliance is not in use and is completely cold, the opportunity should be taken to wipe over with a
damp cloth. Do not use abrasive cleaning powders or furniture polish.
Discoloration of wall fi nishes can sometimes occur immediately above a storage heater due to the properties of some paints and
decorating materials or the presence of environmental impurities in the air (such as soot or incense generated from the burning of
candles, etc.) A suitable shelf (available from Dimplex) may be fi tted to limit the extent of any wall discoloration.
After Sales Service
Your product is guaranteed for two years from the date of purchase. Within this period, we undertake to repair or exchange this
product free of charge (subject to availability) provided it has been installed and operated in accordance with these instructions.
Your rights under this guarantee are additional to your statutory rights, which in turn are not affected by this guarantee.
Should you require after sales information or assistance with this product please go to
www.dimplex.co.uk
where you will fi nd our self
help guide by clicking on ‘After Sales’ or ring our help desk on 0844 879 3588 (UK) or 01 842 4833 (ROI). It would assist us if you can
quote the model number, series, date of purchase, and nature of the fault at the time of your call. Spare parts are also available on the
website
www.dimplex.co.uk
.
Please do not return a faulty product to us in the fi rst instance as this may result in loss or damage and delay in providing you with a
satisfactory service.
Please retain your receipt as proof of purchase.
To commission the heater set both the input and output controls to maximum and leave for 48 hours, after this period the
controls should be adjusted for everyday use - see ‘SETTING THE CONTROLS’ on the front cover of these instructions.
24-hour Convector Operation
In certain circumstances it may be desirable for the convector to be available during the off-peak period. If this is so the installer can
select this option during installation. However, the user should be aware of the following:
1.
If the convector heater is not required during the off-peak period the user must remember to switch it off.
2.
If the convector heater is used at a high level for a signifi cant period during the off-peak period it will have the effect of
reducing the level of charge taken by the storage heater for a given input setting. A higher setting of the input control may be required
to compensate for this.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be
disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice in your country.
© GDC Group Ltd. All rights reserved.
Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing.
A division of the GDC Group Ltd, Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF
Dimplex,
Millbrook House,
Grange Drive,
Hedge End,
Southampton, SO30 2DF.
Tel:
0844 879 3588
Fax:
0844 879 3583
Web-site
www.dimplex.co.uk
This product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3.
These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
Switching on
To put the convector switch F in the ON position, depress the right-hand side of the switch. The switch neon will glow when the switch is
in the ON position. If the room temperature is below the thermostat setting neon C will glow, showing the convector is providing heat.
Setting the Thermostat
The thermostat knob A should be set to the comfort level required. Turning the knob clockwise will increase the room temperature
selected, but the actual setting to provide the required conditions will be found by experience. If, when the convector heater is switched
ON and available for use, the room temperature is below that set on the control knob, neon C will be illuminated, showing the heater
elements are energised.
Convector Control Panel
A
Thermostat Scale representing an approximate range of temperatures from
5°C to 35°C.
B
Symbol representing heat convection.
C
Neon lit when convector using current.
D
Symbol representing OFF position of convector switch.
E
Symbol representing ON position of convector switch.
F
Convector ON/OFF switch with neon to show when switch is in ON position.