11
Remote Control
The On/Off Switch must be in the
‘ON’
( I )
position in order for the
remote control to operate. (Figure
8)
!
NOTE:
To operate correctly,
the remote control must be pointed
towards the remote control sensor.
To operate, push the ON but
-
ton to turn fireplace on, push the
Standby button to turn the fire
-
place off.
Battery Replacement
To replace the battery:
1.
Slide battery cover open on
the remote control (Figure 8).
2.
Install two 1.5 Volt (AAA) bat
-
teries in the battery holder.
3.
Close the battery cover.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
Operation
Battery Cover
Figure 8
Standby
Button
On
Button
