DIMAX GROUP Konner & Sohnen 4260405363926, Руководство пользователя

Страница: 7 / 13

1. Ensure that the cultivator is placed on a flat,
level surface.
2. Place an oil drain tray under the cultivator
engine.
3. Unscrew the drain cap located under the
dipstick cap using a 10 mm wrench.
5. Wait for the oil to drain.
6. Replace and tighten the drain cap.
Dipstick cap
Drain cap
1. Make sure the device is mounted on a flat, level surface.
2. Unscrew the dipstick cap on the engine.
3. Fill the crankcase with highly refined oil using a funnel.
4. The oil level should be as shown in Fig.
TO ADD OIL, PROCEED AS FOLLOWS:
Oil level
Oil drain plug
Spark plug
Electrode
0,6-0,8 mm
SPARK PLUG MAINTENANCE
Spark plug is an important part which provides correct and long work of the engine. It is important to keep
an eye on the plug – it should not have cracks, must be installed in a right way and have no soot.
DPARK PLUG CHECKING
Recommended for use are spark plugs F6RTC, for example NGK BPR6ES.
Follow this steps to check the spark plug ( see the pictures below ):
1. Take off the cap from the spark plug.
2. Loosen the plug with the help of candle brace.
3. Carefully check if the plug is damged. Remove if it has any damage.
4. Measure the gap – it should be within 0,6-0,8 mm.
5. Carefully clean the spark plug with the metal brush and remove the dust before reuse of the unit.
Please don’t forget to measure the gap.
6. Plug in the spark plug to its place.
INTERNAL COMBUSTION ENGINE
To ensure the greatest service life of the engine, monitor the oil level and check oil and air filters for soiling
on a regular basis. The cooling fins must be kept clean at all times to ensure sufficient cooling of the engine.
www.ks-power.de/en | 17