DIMAX GROUP Konner & Sohnen 4260405363926, Руководство пользователя

Страница: 3 / 13

Warning! Stop the engine before refueling, transporting
and if the unit is unattended.
ATTENTION - DANGEROUS
The fuel contaminates the earth and groundwater. Do not
allow gasoline to run out of the tank!
ATTENTION - DANGEROUS
The operating conditions of the device, storage and transportation can be found in the full web version
of the manual.
WORKING WITH THE TILLER
The device should be turned on in accordance with the instructions in the owner’s manual. Make sure the
operator keeps a safe distance from the working parts of the cultivator. Never place your legs or arms on the
rotating parts or underneath them. To lift the device, two people must grab the handles and shafts of the
cultivator. Wear special safety gloves to protect your hands and safety shoes; do not operate the cultivator
in open toe shoes.
BE CAREFUL!
- The engine and exhaust pipe must be kept clean to avoid potential fire. Thoroughly check them for
foliage, grass, and oil or fuel leaks.
- Watch out for the rotating parts. Do not touch the rotating cutters
COMPOSITION
3
1. Cultivator with cutters
2. Left handle
3. Clutch handle
4. Tilling depth limiter
5. Steering column
6.Transport whee
7. Right handle (ON/OFF, speed)
COLLECTING THE TILLER
4
ASSEMBLE THE CULTIVATOR AS ILLUSTRATED IN THE APPENDIX:
1. Insert the coulter in the bracket - see fig. 2 in the Appendix.
2. Mount the transport wheel - see fig. 3 in the Appendix.
3. Pull the spring - see fig. 4 in the Appendix.
4. Mount the steering column - see fig. 5 in the Appendix.
5. Install the right and left handles on the control panel - see fig. 6 in the Appendix.
Be sure to read the full version of the manual
before getting started!
www.ks-power.de/en | 13