
20
NOTE: If more than one heating zone has a timer setting,
the timer indicator will show the shortest set time. The red dot
next to the applicable zone indicator will flash.
5. When the cooking time expires, the corresponding
cooking zone will switch off automatically.
Note: The default setting of minute reminder and timer is 30 minutes.
Note: After adjusting, the timer indicator will flashing for 5 seconds and then
stop flashing, then the setting is confirmed.
Note: The minute reminder and timer can be use at same time, timer indicator
shows the lowest time setting. If the lowest setting is minute reminder, the red
dot next to timer indicator will flash. If the lowest setting is timer setting, the
red dot of the corresponding cooking zone power level indicator will flash.
Note: If indicator shows timer setting, to check the minute minder setting,
press the timer control button , then the indicator will show minute
minder setting.
WARNING INDICATORS AND SAFETY MECHANISMS
Detection of Pan and Small Articles
For induction hob, if display flashes” “alternately with heat setting.
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
Notes:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2. The display will auto turn off after 2 minutes if no suitable pan is placed on it.
3. When an unsuitable size or non-magnetic pan (e.g. aluminum), or some
other small item (e.g. knife, fork, key) has been left on the hob, the
corresponding cooking zone will automatically turn off in 1 minute.
Residual Heat Warning
Beware of hot surfaces
When the hob has been operating for a period of time, there
will be some residual heat. The letter “ H ”appears in power
setting indicator to warn you to keep away from it.
Auto Shutdown